Do you know how to prepare evaporative coolers for the summer?

Preparing an evaporative cooler for summer requires a few simple steps.

First, start by cleaning the unit.

Remove any debris from the inside and outside of the cooler.

Clean the pads, which are the parts that soak up water and help cool the air.

Next, inspect the unit for any damages or leaks.

Look for cracks, holes, or other signs of wear and tear.

If necessary, replace any damaged parts.

Then, check the water supply system.

Make sure the pump and water supply lines are working properly.

If the pump is not functioning, replace it.

If the water supply lines are clogged, clear them.

It’s also important to check the electrical components.

Ensure that all the wires are properly connected and that the fan motor is functioning properly.

Replace any faulty parts.

Now, turn on the cooler and let it run for a few minutes.

Check the temperature of the air coming out of the unit.

If it’s not cool enough, adjust the settings until you get the desired temperature.

Finally, set the timer or thermostat to automatically turn the cooler on and off as needed.

This will help to conserve energy and keep your home cool and comfortable all summer long.

In conclusion, preparing an evaporative cooler for the summer is a simple process that requires cleaning, inspecting, and maintaining the unit.

By following these steps, you can ensure that your cooler is ready to keep you cool and comfortable all season long.

In Esencial Cool we have a wide range of portable evaporative coolers suitable for every need.

Contact our specialists.

We will be happy to provide you with additional information and help you find the right solution for the problems caused by heat.

Call us / WhatsApp: +(34) 633 938 824